A boulevard median is narrow and long. A park is in one place; a median is everywhere. That difference changes every step of irrigation: the line plan, the crew's work and how a fault is noticed.

Why is a median irrigation system hard?

  • Length. A median runs for kilometres. Valves line the road, hundreds of metres apart.
  • No power. Most valve boxes have no electricity. Laying cable means digging up the road.
  • Traffic. To reach a valve, the crew closes a lane or works at the kerb. Even a schedule change is a traffic job.
  • Wind. Sprinkler water drifts onto the road in wind. Water is wasted; the road gets wet.
  • Mixed methods. Drip is common on narrow medians, sprinklers on wide ones. Both can sit side by side on one boulevard. What is different on a drip line: drip irrigation automation.

A fixed timer sees none of this. It waters in rain and it waters in wind. A valve stuck open is reported by a driver days later.

Night watering: less traffic, less evaporation

A median is watered before dawn. Traffic is light at night; a wet road meets fewer cars. Evaporation is low; the water reaches the soil. In ESTRON the watering window is set per line. The AI decides in the morning; watering runs that night, inside the window. The decision logic: AI irrigation.

The wind rule is one sentence: "Postpone if wind exceeds 6 m/s." On a windy night the sprinkler line waits; the drip line keeps running. Rules are written per line.

Line plan: battery units along the road

A battery controller is fitted to each valve. It runs on 2 × 9 V batteries. No cables are laid, nothing is dug up. Two valves in the same box are managed by one LND-2. Where a flow sensor is wanted, LND-1 is used; it has the pulse input.

Lines are split by method. A drip line and a sprinkler line do not share a schedule. The AI decides for each line separately; the sprinkler line waits in wind while the drip line waters.

In median irrigation a battery valve controller opens the solenoid valve and the sprinklers run

Gateway coverage along a line

The LoRaWAN gateway links the units on site to the cloud. Range is up to 2 km in the city. A park is covered from one point; a median is a line. The gateway goes near the middle of the boulevard, at a high point: a rooftop or a lighting mast.

A long boulevard needs a second gateway. Coverage is measured at the site survey. Even a single valve outside coverage is managed on site over Bluetooth, from a phone. Details: how far does LoRaWAN reach? and what is a LoRaWAN gateway and how is it installed?

Leak alarms: a leak on a median is invisible

In a park a leak makes a puddle. On a median the water runs onto the road and the kerb; nobody notices. That is why main lines get a flow sensor. The sensor connects to the pulse input of LND-1. The system catches three conditions:

ConditionLikely causeIn the panel
Flow while the valve is closedValve not closing fully, pipe leakingLeak alarm
Flow higher than expectedBroken pipe, missing sprinklerHigh-flow alarm
Flow lower than expectedBlocked sprinkler, dirty filterLow-flow alarm

The alarm goes to the mobile app, e-mail and SMS. The crew knows which box to go to and steps into the lane once. Details: catch water leaks without going to the field.

Records and reports

Every run is logged with date, time, duration and reason. On lines with a flow sensor, consumption is measured in litres. Reports are produced in the panel and exported to Excel. The water bill is explained line by line. The contractor is audited from the same record.

ESTRON runs on medians today: on Anadolu Boulevard, for Samsun Metropolitan Municipality, 9 km of median is irrigated remotely. Sites are on the references page. For large open areas such as public gardens: public garden irrigation.

Installation order

StepWhat is done
SurveyValve list along the road; drip and sprinkler lines separated; gateway point and coverage measured
GatewayMounted at a high point; power and internet; a second gateway on a long boulevard
UnitsA unit and batteries in each valve box; set up over Bluetooth; one visit to the lane
PanelThe boulevard is one area, each valve one water line; night window; wind rule
MonitoringDecisions and alarms watched together in the first week

The existing pipes, drippers, sprinklers and valves stay in place. ESTRON is made in Türkiye; hardware and software are developed locally. The full picture for municipal sites: park irrigation system for municipalities.

In short: a median is a long line. Water at night, hold in wind. Fit a battery unit to every valve; lay no cable. Put the gateway high, near the middle of the line. Put a flow sensor on the main lines, so a leak shows in the panel before it reaches the road.

Frequently asked

Does the system work when the median has no power?

Yes. The units run on batteries; the valve box needs no electricity. Power and internet are needed only at the gateway. The schedule sits in the unit's memory; it runs on time even if the internet is down.

Can drip and sprinklers share one boulevard?

Yes. The two methods are defined as separate lines. Each line has its own schedule and its own decision. The wind rule is written only on the sprinkler line.

How many gateways are needed?

It depends on the length of the boulevard and the buildings around it. In the city one gateway covers up to 2 km. The number is set by measurement at the survey. Other questions are on the FAQ page.