The schedule is built per line. A line is a group of sprinklers that open together. Lawn, shrubs and new plantings belong on separate lines; their needs differ. Time, duration and days are entered for each line.

Watering time: at night or before dawn

Watering is done before dawn or right after sunset. The Ministry of Agriculture and Forestry's xeriscape guidance recommends the same hours. During the day, evaporation and wind losses rise; part of the water is gone before it reaches the soil.

Parks and public gardens have one more condition: watering must not coincide with visiting hours. Watering finishes before dawn; no sprinkler runs on the walking path. In ESTRON the watering window is set per line. The AI decides in the morning; watering runs inside that window.

Duration: the reference time and the formula

Duration depends on the line's flow rate and the plants' daily water demand. The formula is short: duration (min) = (ETc − rainfall) × area ÷ flow rate. ETc is the plant's daily water loss; it changes with the weather (how is ETc calculated?). Example: 100 m² of lawn, 5 mm demand, no rain, line flow 18 L/min. 500 litres ÷ 18 ≈ 28 minutes; about 32 minutes with a sprinkler efficiency allowance.

This calculation is done once; the result is entered in the panel as the "reference duration". The daily correction comes from the system. The steps: how to calculate lawn watering time.

Days: how many times a week?

For lawns the common rule is not short daily watering but two or three deep waterings a week. Roots go deeper; the surface dries; weeds and disease decrease. In clay soil water infiltrates slowly; a long run flows off the surface. There the duration is split in two, with a pause between.

New plantings are different. In the first season they are watered often and briefly on a fixed schedule. Once established, they move to deep watering and AI mode. The mode is set per line; two modes run side by side on the same site.

Season: longer in summer, shorter as it cools

A fixed "30 minutes every day" schedule is too much in April and sometimes too little in July. There are three ways:

  • Fixed schedule. Days, time and duration are yours. It is changed by hand at the turn of the season. A rain sensor postpones in rain.
  • Monthly percentage. A separate rate is entered for each month: April 50%, July 100%, for example. The reference duration is multiplied by that rate.
  • AI mode. The duration is recalculated every day. Postponed if rain is expected; skipped if the soil is moist; extended as needed on a hot day. The decision steps: how does the AI make the irrigation decision?

How weather data is used: weather-based irrigation.

Example schedule: three lines

LineWindowReference durationDaysMode
Lawn (sprinklers)04:00–06:0032 min3 a weekAI
Shrubs and trees (drip)05:00–07:0045 min2 a weekAI
New planting06:00–07:0010 minEvery dayFixed, first season

The durations are examples; each line is calculated from its own flow rate. The windows open one after another; the main line's pressure does not drop.

ESTRON mobile app site screen: active irrigation schedule, valve states and pending tasks

Rules: the limits outside the schedule

The schedule states time and duration. Rules state the exceptions. A rule is written in your own words: "Postpone if wind exceeds 6 m/s." "No watering at weekends." "Postpone if frost is expected." The AI follows these rules. If a rain sensor is fitted, it stops watering when rain starts. Rules and modes in detail: flexible irrigation automation.

The schedule is entered in the web panel and sent to hundreds of valves at once. On site, the mobile app loads the same schedule over Bluetooth. The result: compared with a fixed schedule, up to 40% less water. ESTRON is made in Türkiye; hardware and software are developed locally.

In short: time: before dawn. Duration: (ETc − rainfall) × area ÷ flow rate, calculated once. Days: 2–3 deep waterings a week; new plantings often and briefly. Season: monthly percentage or AI. Rules in plain sentences.

Frequently asked

Does night watering harm plants?

Watering before dawn is the hour with the lowest losses. Leaves dry with the morning sun. The xeriscape guidance recommends the same. Details: the xeriscape decree.

Should every line have its own schedule?

Yes. Lawn, shrubs and new plantings need different amounts of water. Duration, window and mode are set per line.

Do I have to change the schedule by hand at the start of each season?

On a fixed schedule, yes. In monthly percentage and AI mode, no; the duration adapts on its own. Other questions are on the FAQ page.